Vintage Mustang Forums - View Profile: Turnall

Turnall Turnall is online now

Senior Member

  Visitor Messages

Showing Visitor Messages 1 to 4 of 4
  1. myfirstcar66
    04-04-2019 12:09 PM - permalink
    myfirstcar66
    Subpar 63 John reminded me you are in the Dothan area and when he gets his 66 down here May-ish he brought up maybe cruising to meet up sometime. I live in Auburn and it has been a LONG time since I cruised any more than about 25 miles from home. Would love to see your ride in person. Also enjoying your build thread. Hope to have the interior and AC done on the 66 I got for my son and me to work on by the time he turns 15 so we can do driving lessons in it !! Enjoy the Spring. -- Dave
  2. Caper50
    10-07-2017 06:40 PM - permalink
    Caper50
    Allen, just wondering if you could send me pics of your vacuum routing. I tried looking through the manual but can't seem to find it. I ran a temporary line from the passenger side of the carb to the distributor but that's it. I just realized I have no vacuum pressure on that line when I went to disconnect it at the distributor to set the timing. I tried searching the net for complete pics but no luck. Any help is appreciated. Btw, I got a set of rad and heater clamps...Scott drake brand, they are supposed to be concours...they are absolute junk. They were the source of my coolant leaks. My email is [email protected]

    Cheers,

    Brian
  3. 1969sag
    12-13-2016 12:21 PM - permalink
    1969sag
    I am kind of at my bottom. I bought this guitar as an investment. I Know it will be worth a lot more in the future. I am at the point on this guitar that I would rather keep it, than loose any more money from selling it. I could really use the money. BUT. I could sell it fast for fast cash any day of the week, for 3,000.00, If I wanted to take a loss on it. I just can't bring myself to sell it cheaper at this point.
  4. atitagain
    08-22-2016 10:45 PM - permalink
    atitagain
    Sir,

    I am a noob but unless the camera flipped the image or your did a MCE cheat your piston notches look like they are pointed aft? Again you seem way more experienced but just had to ask incase it was a mistake

  About Me

  Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: Today 02:34 PM
  • Join Date: 01-31-2013
  • Referrals: 0

  Friends

Showing Friends 1 to 3 of 3
  • Caveman49
    • Caveman49 is offline
  • myfirstcar66
    • myfirstcar66 is offline
  • RM69
    • RM69 is offline

  Mentions

08-19-2019
09:21 PM - Turnall mentioned subpar63 in post Bullitt going on the block
...apologies to John ( subpar63 ) for this total hij...
08-11-2019
12:36 PM - Turnall mentioned Israel in post 1969 Mach 1
...s you are doing. Israel, this is a good idea...
08-08-2019
09:12 PM - Turnall mentioned patrickstapler in post BAMA Fans, Here's Your Chance!!
Bear's Caddy patrickstapler subpar63 Allen
09:12 PM - Turnall mentioned subpar63 in post BAMA Fans, Here's Your Chance!!
...dy patrickstapler subpar63 Allen
08-07-2019
10:13 PM - Turnall mentioned 69bosssvt in post BOOM
...at was he expecting 69bosssvt? I agree, kudos t...
08-06-2019
08:59 AM - Turnall mentioned Midlife in post 1969 Blue/Red wire for Instrument/Radio/Console/Clock Lights
Midlife Allen
08-05-2019
10:33 PM - Turnall mentioned mexicruiser in post WTB 69 highback driver seat backrest
...t,thanks I think mexicruiser found one. I may nee...
08-04-2019
06:45 PM - Turnall mentioned c.midland in post 1969 Mach 1
c.midland, the console in the ...
06:15 PM - Turnall mentioned mexicruiser in post 1969 Mach 1
...... Shout out to mexicruiser for the seat bottoms...
08-02-2019
05:46 PM - Turnall mentioned mexicruiser in post So close to finishing restoration and now this...
...hat I needed from mexicruiser today. I appreciate ...
07-19-2019
10:57 PM - Turnall mentioned patrickstapler in post Brian's 66 coupe build
... pic, thanks Ask patrickstapler the nickname of the ...
06:53 PM - Turnall mentioned macstang in post Pressure Plate Mounting
...e pic and the ones Macstang posted look very spe...
07-17-2019
10:38 PM - Turnall mentioned Tallguy in post Thrill of victory and the Agony of Defeat – Cam bearings destroyed. (NOT the lobes)
...han at start-up. Tallguy, I took the liberty ...
07-15-2019
09:58 PM - Turnall mentioned Tallguy in post Thrill of victory and the Agony of Defeat – Cam bearings destroyed. (NOT the lobes)
Tallguy, was assembly lube u...
07-13-2019
02:20 PM - Turnall mentioned mexicruiser in post So close to finishing restoration and now this...
...ived any pictures.. mexicruiser. Allen
07-12-2019
02:14 PM - Turnall mentioned Knapper in post Full Restoration Processes & Procedures
... finally explain to Knapper how it usually works...
07-11-2019
10:35 PM - Turnall mentioned awhtx in post Just bought a 1969 Mach 1!!
... three..... Nice awhtx! The Mach 1 I picked...
07-08-2019
07:04 AM - Turnall mentioned mexicruiser in post So close to finishing restoration and now this...
...you link the ad? If mexicruiser can't use them, I ca...
06:40 AM - Turnall mentioned cobra94svt in post Last wire left
...ut we'll say what cobra94svt says. Solid black i...
07-06-2019
12:02 AM - Turnall mentioned GypsyR in post Sacramento County: Illegal to Work on Your Own Car in Your Own Garage
...but as moderators ( GypsyR, Israel, patrickst...

  Quotes

08-25-2019
12:54 PM - Turnall quoted Bishinvest in post Values of 69 fastbacks and mach 1s
And does the impending recessio...
08-24-2019
04:15 PM - Turnall quoted silverblueBP in post Alignment questions
After each adjustment, bounce (se...
08-23-2019
09:33 PM - Nailbender quoted Turnall in post Pallet motors
Someones obsessed...:shrug: ...
08-21-2019
06:56 PM - 2nd 66 quoted Turnall in post Bullitt going on the block
Whoever buys it should consi...
08-20-2019
10:24 AM - Turnall quoted JDM4401 in post Need help with 69 mach 1 value
All that interest and not 1 ...
08-19-2019
09:20 PM - Turnall quoted silverblueBP in post Bullitt going on the block
Watch it over and over until you ...
09:06 PM - silverblueBP quoted Turnall in post Bullitt going on the block
Stop it, I'm dying over here...
08:35 PM - Turnall quoted silverblueBP in post Bullitt going on the block
https://youtu.be/XeOn5FjsYAI ...
08:28 PM - CJM68GT390 quoted Turnall in post Bullitt going on the block
Whoever buys it should consi...
07:54 PM - silverblueBP quoted Turnall in post Bullitt going on the block
Whoever buys it should consi...
11:31 AM - Turnall quoted silverblueBP in post Recommendations for Shock Absorbers
This thread was a good laugh. ...
10:26 AM - Turnall quoted JDM4401 in post Need help with 69 mach 1 value
I found it interesting he en...
08-17-2019
03:36 PM - myfirstcar66 quoted Turnall in post Why aren't there more threads on steering wheel restoration?
What do you do to remove the...
02:42 PM - Turnall quoted mexicruiser in post So close to finishing restoration and now this...
I finished installing the 69 sea...
12:14 PM - Turnall quoted BlakeTX in post Why aren't there more threads on steering wheel restoration?
I have restored more than a ...
11:52 AM - mqu02 quoted Turnall in post 1969 Mach 1
For those that don't know, o...
11:19 AM - Boss5Oh quoted Turnall in post 1969 Mach 1
How to remove and install th...
08-16-2019
10:01 PM - Turnall quoted patrickstapler in post 1969 Mach 1
What’s up with that driver seat? &#...
06:29 PM - Turnall quoted patrickstapler in post Bullitt going on the block
I will adjust my speculative bid to...
08-15-2019
09:49 PM - Turnall quoted 4ocious in post Bullitt going on the block
Well, first of all, I'm not ...

  Feedback

iTrader Profile Recent Ratings
Feedback Score:
Positive Feedback:
0
0%
Members who left positive:
Members who left negative:
0
0
Total positive feedback: 0
Submit Feedback
  Past
Month
Past
6 Months
Past
12 Months
Positive Positive 0 0 0
Neutral Neutral 0 0 0
Negative Negative 0 0 0
 
For the best viewing experience please update your browser to Google Chrome