Re: Turn Signal Issue
The hazards and blinkers use the same filament in the bulb and the fact that the hazards and right blinkers are working means that both flashers are good.
As Al stated one of the bulbs is either bad, or if they both are staying lit then you may have a bad ground, most likely at the blinker bulb socket at the left front or left rear. If there's not enough current flowing through the blinker flasher then the flasher will fail to blink and both bulbs will just stay lit. Electrically a bad ground will look like a resistor which limits the amount of current flowing through the flasher.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.