Heater & AC control alignment problem
I have a '66 GTO with factory AC. The control lever on the dash isn't in proper alignment with the vacuum control switch. The controls have to be set to the left of the actual position indicated. For example... in order to turn the switch to "off", the control on the dash lines up to the "t" of the 'heat' position on the dash. To turn it to "vent" the control lever is about halfway between "off" and "vent". I can hear the master switch click in each of these positions. When I look through the glove box opening, I can see the vacuum switch rotating through its positions as driven by the control arm, but I can't see anyway to adjust the arm to get it to line up properly in sync with the vacuum switch. Is the problem with the position of the slide lever to the vacuum switch or with the slide lever to the position of the master switch? The service manual doesn't talk about any adjustments to this unit. Can this only be corrected by removing the control unit from the dash?
Last edited by histoy; 08-05-2019 at 02:55 PM.