hi,iv'e just rebuild my front end suspension all new ball joints, tie rods and poly bushes.
just wondering if anyone know torque specs for 65 impala ball joint,tie rods,lower control arm bolt and upper control arm bolt.
I just cant find any specs
All of this information is printed on the last dozen or so pages of the Chassis Service manual.
Ball Joint Stud 50 ft./lbs. for the upper and 90 ft./lbs. for the lower. Ball Joint to the Upper Control Arm 25 ft./lbs.(attaching bolts).
Control Arm Pivot to Upper Frame 85 ft./lbs. and 110 ft./lbs. for the lower.
Tie Rod Ends: Stud is torqued to 35 ft../lbs., and the nut is torqued to 60 ft../lbs.